Sitename Your slogan goes here
LX DSP-99
Description
| Input Connectors | : 1/4\\\" TRS, female XLR (pin 2 hot) |
| Input Type | : Electronically balanced/unbalanced, RF filtered |
| Input Impedance | : Balanced 38 kOhm, unbalanced 20 kOhm |
| Max Input | : >+21dBu balanced or unbalanced |
| CMRR | : >40dB, typically >55dB at 1kHz |
| Output Connectors | : 1/4\" TRS, male XLR (pin 2 hot) |
| Output Type | : Impedance-balanced/unbalanced, RF filtered |
| Output Impedance | : Balanced 80 ohm, unbalanced 50 ohm |
| Max Output | : >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
| Bandwidth | : 20Hz to 20kHz, +0.5/-1dB |
| Frequency Response | : 50kHz, +0.5/-3dB |
| Dynamic Range | : Typically >112dB |
| Signal to Noise Ratio | : Typically >95dB |
| THD+Noise | : <0.003% |
| Interchannel Crosstalk | : <-90db, 20Hz to 20kHz |
| Bypass Switch | : Bypasses the graphic equalizer section in the signal path |
| Low cut Switch | : Activates the 50Hz 12dB/octave Bessel high-pass filter |
| Range Switch | : Selects either +/- 6dB or +/- 12dB slider boost/cut range |
| Operating Voltage | : 100VAC-240VAC 50/60Hz |
| Power Consumption | : 15W |
| Power Connector | : IEC receptacle |
| Unit Weight | : 4.8 lbs.(2.2 kg) |
| Shipping Weight | : 6.2 lbs.(2.8kg) |
| Dimensions | : 1.75\" (4.4cm) H x 6\"(15.24cm) D x 19\" (48.26cm) W |