Sitename Your slogan goes here
231S
Description
| Input Connectors | : 1/4\" TRS, female XLR (pin 2 hot) |
| Input Type | : Electronically balanced/unbalanced, RF filtered |
| Input Impedance | : Balanced 40k ohm, unbalanced 20k ohm |
| Max Input | : >+21dBu balanced or unbalanced |
| CMRR | : >40dB, typically >55dB at 1kHz |
| Output Connectors | : 1/4\" TRS, male XLR (pin 2 hot) |
| Output Type | : Impedance-balanced/unbalanced, RF filtered |
| Output Impedance | : Balanced 100 ohm, unbalanced 50 ohm |
| Max Output | : >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
| Bandwidth | : 20Hz to 20kHz, +0.5/-1dB |
| Frequency Response | : <10Hz to >50kHz, +0.5/-3dB |
| Dynamic Range | : 108dB |
| Signal to Noise Ratio | : 90dB |
| THD+Noise | : <0.004% |
| Interchannel Crosstalk | : <-80dB, 20Hz to 20kHz |
| Bypass Switch | : Bypasses the graphic equalizer section in the signal path |
| Low cut Switch | : Activates the 50Hz 12dB/octave high-pass filter |
| Range Switch | : Selects either +/- 6dB or +/-12dB slider boost/cut range |
| Operating Voltage | : 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz |
| Power Consumption | : 15W |
| Power Connector | : IEC receptacle |