EX-328

Description

Input Connectors	: 1/4\\\\\\\" TRS, female XLR (pin 2 hot)
Input Type	: Electronically balanced/unbalanced, RF filtered
Input Impedance	: Balanced 40 kOhm, unbalanced 20 kOhm
Max Input	: >+21dBu balanced or unbalanced
CMRR	: >40dB, typically >55dB at 1kHz
Output Connectors	: 1/4\\\\\\\" TRS, male XLR (pin 2 hot)
Output Type	: Impedance-balanced/unbalanced, RF filtered
Output Impedance	: Balanced 100 ohm, unbalanced 50 ohm
Max Output	: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth	: 20Hz to 20kHz, +0.5/-1dB
Frequency Response	: 50kHz, +0.5/-3dB
Dynamic Range	: Typically >112dB
Signal to Noise Ratio	: Typically >95dB
THD+Noise	: <0.003%
Interchannel Crosstalk	: <-90db, 20Hz to 20kHz
Bypass Switch	: Bypasses the graphic equalizer section in the signal path
Low cut Switch	: Activates the 50Hz 12dB/octave Bessel high-pass filter
Range Switch	: Selects either +/- 6dB or +/- 12dB slider boost/cut range
Operating Voltage	: 100VAC-240VAC 50/60Hz
Power Consumption	: 15W
Power Connector	: IEC receptacle
Unit Weight	: 4.8 lbs.(2.2 kg)
Shipping Weight	: 6.2 lbs.(2.8kg)
Dimensions	: 1.75\\\\\\\" (4.4cm) H x 6\\\\\\\"(15.24cm) D x 19\\\\\\\" (48.26cm) W